Malibu L4-2.4L (2010)
Band Apply Servo: Service and Repair
Intermediate/Fourth Servo Assembly Replacement
Intermediate/Fourth Servo Assembly Replacement
Removal Procedure
1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
2. Remove the oil pan and filter. Refer to Automatic Transmission Fluid Filter and Seal Replacement (See: Fluid Filter - A/T/Service and Repair).
3. Remove the two intermediate/4th servo cover bolts, the servo and the spring.
Disassemble Procedure
1. Remove the piston and pin assembly (76 and 77) from the servo cover (80).
2. Remove the snap ring (70) from the servo pin (76).
3. Remove the piston (77) and the servo cushion springs (68) from the servo pin (76).
4. Remove the servo piston seals (78, 79) from the servo cover (80).
5. Discard the servo piston seals (78 and 79). Do not reuse the servo piston seals.
