Malibu L4-2.4L (2010)
1. Install the 3 input speed sensor seals (1).
2. Install the input speed sensor (3).
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the input speed sensor bolt (2) M6 x 23 and tighten to 12 Nm (106 lb in).
4. Connect the input speed sensor electrical connector (1).
5. Install the transmission control valve body cover.
Perform the service fast learn adapt procedure. Refer to Service Fast Learn Adapts (See: Automatic Transmission/Transaxle/Testing and
Inspection/Programming and Relearning/6T30/6T40/6T45 - Automatic Transmission).
