Malibu L4-2.4L (2010)
2. Install the TFP switch assembly onto the control valve body assembly and install the bolts.
Tighten the control valve body bolts to 12 Nm (9 lb ft).
3. Install the transaxle case side cover.
4. Start the engine, warm up the transaxle, and check for leaks.
5. Inspect for proper fluid level.
Note: It is recommended that transmission adaptive pressure (TAP) information be reset.
Resetting the TAP values using a scan tool will erase all learned values in all cells. As a result, The ECM, PCM or TCM will need to relearn TAP
values. Transmission performance may be affected as new TAP values are learned.
6. Reset the TAP values. Refer to Transmission Adaptive Functions See: Automatic Transmission/Transaxle/Description and Operation.