chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Wiper and Washer Systems > < Procedures|Page 10729
Page 7
background image

17. Clean any excess auto-adhesive from the body.
18. Install the air inlet grille. Refer to Air Inlet Grille Panel Replacement   (See: Body and Frame/Cowl/Cowl Moulding / Trim/Service and Repair/Air

Inlet Grille Panel Replacement).

19. Install the windshield wipers arms and blades. Refer to Windshield Wiper Arm Replacement   (See: Wiper and Washer Systems/Wiper

Arm/Service and Repair).

20. Install the windshield side garnish moldings. Refer to Windshield Pillar Garnish Molding Replacement   (See: Body and Frame/Interior Moulding

/ Trim/Trim Panel/Service and Repair/Windshield Pillar Garnish Molding Replacement).

21. Install front edge of the headliner.
22. Install the sunshades. Refer to Sunshade Replacement   (See: Body and Frame/Interior Moulding / Trim/Sun Visor/Service and Repair/Sunshade

Replacement).

23. Install the inside rearview mirror. Refer to Inside Rearview Mirror Replacement   (See: Body and Frame/Mirrors/Service and Repair/Inside

Rearview Mirror Replacement).

24. Install the remote control door lock receiver. Refer to Remote Control Door Lock Receiver Replacement   (See: Accessories and Optional

Equipment/Antitheft and Alarm Systems/Keyless Entry/Keyless Entry Module/Service and Repair).

25. Ensure that all electrical components operate properly.
26. Close the hood.

Wiper and Washer Systems > < Procedures|Page 10729