Malibu L4-2.4L (2010)
Windshield Washer Reservoir: Service and Repair
Windshield Washer Solvent Container Hose Replacement
Windshield Washer Solvent Container Hose Replacement
Removal Procedure
1. Open the hood.
2. Disconnect the solvent container washer hose (1) from the windshield washer hose (2) and disengage the hose from the solvent container clips.
3. Route the hoses downward to allow draining.
4. Drain the washer solvent from the washer solvent container.
5. Remove the front wheelhouse panel splash shield. Refer to Front Wheelhouse Panel Splash Shield Replacement (See: Body and
Frame/Fender/Front Fender/Front Fender Liner/Service and Repair/Front Wheelhouse Panel Splash Shield Replacement).
6. Disconnect the washer hose (1) and electrical harness from the washer pump (2).
