Malibu L4-2.4L (2010)
Wiper Motor: Service and Repair
Windshield Wiper System Module Replacement
Windshield Wiper System Module Replacement
Removal Procedure
Note: The new wiper drive system module does not include the wiper motor nor the motor support bracket. You must install the old components to the
new wiper system module.
1. Remove the wiper arms. Refer to Windshield Wiper Arm Replacement (See: Wiper Arm/Service and Repair).
2. Remove the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement (See: Body and Frame/Cowl/Cowl Moulding / Trim/Service and
Repair/Air Inlet Grille Panel Replacement).
3. Remove the bolts (1) attaching the wiper module to the plenum.
4. Carefully lift the wiper module out of the plenum.
5. Disconnect the electrical connector from the wiper motor.
6. Remove the wiper module assembly (2) from the vehicle.