Malibu L4-2.4L Hybrid (2008)
1. Position the knuckle to the upper control arm and install the bolt and nut. Refer to Rear Axle Upper Control Arm Replacement (See: Control
Arm/Service and Repair/Rear Suspension/Rear Axle Upper Control Arm Replacement)
2. Install the coil spring. Refer to Coil Spring Replacement (See: Suspension Spring ( Coil / Leaf )/Service and Repair/Rear Suspension Coil
Spring/Coil Spring Replacement) .
3. Install the stabilizer shaft to knuckle bolt. Refer to Stabilizer Shaft Replacement (See: Stabilizer Bar/Service and Repair/Rear Suspension) .
