Malibu V6-191 3.1L VIN M SFI (1997)
NOTICE: Do not hammer on brake drum as damage to the bearing or deformation of the drum could result.
3. Wheel stud using tool J 6627-A.
4. Dispose of stud.
INSTALL OR CONNECT
1. New stud (insert from back side of hub).
2. Four flat washers on stud.
3. Wheel nut (install with flat side toward washers).
4. Tighten nut until stud head is properly seated in hub flange.
5. Remove nut and washers.
6. Brake drum.
7. Wheel and tire assembly.