Malibu V6-3.5L VIN 8 (2004)
17. Connect the roof rail module-right connector to the vehicle harness connector.
18. Install the CPA to the roof rail module-right connector.
19. Install the garnish molding to the right upper lock pillar.
20. Install the AIR BAG (IGN) and AIR BAG (BATT) fuses into the body control module fuse center.
21. Install the body control module fuse center cover.
22. Use caution while reaching in and turn the ignition switch to the ON position.
The AIR BAG indicator will flash then turn OFF.
23. Perform the SIR Diagnostic System Check if the AIR BAG warning indicator does not operate as described. Refer to Diagnostic System Check -
Vehicle in Vehicle DTC Information.
