Malibu V6-3.5L VIN 8 (2004)
Power Window Switch: Service and Repair
Power Window Switch Replacement - Rear Door
POWER WINDOW SWITCH REPLACEMENT - REAR DOOR
REMOVAL PROCEDURE
1. Remove the door trim panel.
2. Release the tabs and push the switch bezel from the door trim.
3. Disconnect the electrical connectors from the switch.
4. Remove the switch from the bezel.
INSTALLATION PROCEDURE
1. Install the switch to the bezel.
2. Connect the electrical connectors to the switch.
3. Install the switch bezel to the door trim.
4. Install the door trim panel.