Malibu V6-3.5L VIN 8 (2004)
6. Remove the garnish molding from the right upper lock pillar.
7. Remove the connector position assurance (CPA) from the roof rail module-right connector.
8. Disconnect the roof rail module-right connector from the vehicle harness connector.
9. Remove the passenger/right outer trim cover from the I/P (3).
10. Remove the CPA from the I/P module connector (1).
11. Disconnect the I/P module connector (1) from the vehicle harness connector (2).
12. Remove the lower right center pillar trim.
13. Remove the CPA from seat belt pretensioner-RF connector.
14. Disconnect the seat belt pretensioner-RF connector from the vehicle harness connector.
