Malibu V6-3.5L VIN 8 (2004)
6. Using J 39637 , remove the wiper arm from the wiper pivot shaft
INSTALLATION PROCEDURE
IMPORTANT: The wiper arm nut must be hand-started to avoid cross-threading.
1. Install the wiper arm onto the wiper module pivot shaft.
2. Align the wiper blade to the wiper dots on the windshield.
NOTE: Refer to Fastener Notice in Service Precautions.
3. Install the wiper arm nut. Hold the wiper arm to the wiper dot as you tighten the nut.