Malibu V6-3.6L (2010)
7. Connect the lower right HO2S electrical connector to the engine wiring harness electrical connector (2).
8. Install the CPA retainer (3).
9. Install the rear stabilizer shaft. Refer to Stabilizer Shaft Replacement (See: Steering and Suspension/Suspension/Stabilizer Bar/Service and
Repair/Rear Suspension).
10. Install the muffler assembly. Refer to Exhaust Muffler Replacement (See: Engine, Cooling and Exhaust/Exhaust System/Muffler/Service and
Repair).
