Malibu V6-3.6L (2010)
Installation Procedure
1. Clean the sealing surface of the BPMV with denatured alcohol and a clean shop cloth.
2. Carefully install the EBCM (1) to the BPMV.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the 4 EBCM bolts (1). Tighten the bolts in a cross pattern to 3 Nm (27 lb in).
Note: Ensure the electrical connector is correctly inserted into the EBCM prior to placing the locking lever into position. Failure to make a proper
connection may cause communication problems with the module.
4. Connect the electrical connector to the EBCM.
5. If installing a new EBCM, it is necessary to program the EBCM. Refer to Control Module References (See: Testing and Inspection/Programming
and Relearning).
