Malibu V6-3.9L (2007)
2. Install the HVAC control module.
Notice: Refer to Fastener Notice.
3. Tighten the HVAC control module screws.
Tighten the screws to 2.5 N.m (22 lb in).
4. Install the I/P center trim panel.
Important: Do not adjust any controls on the HVAC control module while the HVAC control module is calibrating. If interrupted
improper HVAC performance will result.
5. Start the engine and let run for one minute.
6. Refer to Control Module References for programming and setup information.
