chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Front Door Switch Bezel Replacement|Page 15691 > < Front Door Switch Bezel Replacement|Page 15689
Page 8
background image

1. Insert the lock knob through the hole in the water deflector. Start at the upper corners by the locating holes in the water deflector to the holes in the

door inner panel.

2. Route the electrical connectors through the existing holes in the water deflector.
3. Secure the outer periphery of the water deflector to the door inner panel. Begin at the bottom center, and work around and upward to the right and

the left.

4. Secure the upper rear piece of the water deflector at the belt.
5. Install the door panel. Refer to  Front Side Door Trim Panel Replacement .

Upper Extension Trim Panel Replacement (Front Door w/o Speaker)

Upper Extension Trim Panel Replacement (Front Door w/o Speaker)

Removal Procedure

1. Open the front door.

2. Remove the upper trim panel extension from the door by pulling straight off at the top.

Installation Procedure

Front Door Switch Bezel Replacement|Page 15691 > < Front Door Switch Bezel Replacement|Page 15689