Malibu Classic L4-2.2L (2008)
Front Door Weatherstrip: Service and Repair
Front Door Opening Weatherstrip Replacement
Front Door Opening Weatherstrip Replacement
Removal Procedure
1. Remove the windshield garnish molding. Refer to Windshield Pillar Garnish Molding Replacement .
2. Remove the center pillar trim. Refer to Center Pillar Lower Garnish Molding Replacement .
3. Pull the front door opening weatherstrip (1) loose and remove it from the vehicle.
Installation Procedure
1. Apply weatherstrip adhesive GM P/N 12345096 (Canadian P/N 993365), or equivalent, to the front door opening weatherstrip (1).
2. Install the front door opening weatherstrip (1) onto the front door pinch-weld, pressing into place until fully seated.
3. Install the windshield garnish molding. Refer to Windshield Pillar Garnish Molding Replacement .
4. Install the center pillar trim. Refer to Center Pillar Lower Garnish Molding Replacement .