Malibu Classic L4-2.2L (2008)
2. Install the hog rings on the under side of the seat cushion.
3. Install the seat cushion cover and pad onto the seat frame.
4. If the vehicle is equipped with a heated seat, connect the heated seat wiring connector.
5. Install the J-strips to the seat frame. Start at the front end and work toward the rear.
6. Install the J-strip to the recliner rod.
7. Install the recliner handle. Refer to Seat Back Recliner Handle Replacement - Front .
8. Install the inner and outer trim covers. Refer to Seat Cushion Outer Trim Panel Replacement - Front Seat .
9. Install the front seat. Refer to Front Seat Replacement - Bucket .
Seat Cushion Inner Panel Replacement - Rear
Seat Cushion Inner Panel Replacement - Rear
Removal Procedure
1. Remove the seat from the vehicle. Refer to Rear Seat Replacement (40 Percent Side) Rear Seat Replacement (60 Percent Side) .
2. Remove the center seat belt buckles. Refer to Seat Belt Buckle Replacement - Center Rear (Extended Sedan) Seat Belt Buckle Replacement -
Center Rear (Sedan) .
3. Remove the inner panel fasteners from the seat cushion.