Malibu Classic L4-2.2L (2008)
Hood Weatherstrip: Service and Repair
Hood Rear Side Seal Replacement
Hood Rear Side Seal Replacement
Removal Procedure
1. Open the hood.
2. Pull the rear side hood seal, located at the end of the plenum to hood seal, from the air inlet grille panel.
3. Remove the seal from the vehicle.
4. Clean any adhesive from the air inlet grille panel and the hood hinge bracket using 3M(TM) P/N 8984.
Installation Procedure
1. Remove the protective backing paper from the adhesive on the rear side hood seal.
