Malibu Classic L4-2.2L (2008)
Important: A mastic/sealer/glue is inside of new liftgate weatherstrips. If a new weatherstrip in being installed, weatherstrip adhesive
should not be used.
If the liftgate weatherstrip is reused, weatherstrip adhesive should be used.
1. Install the weatherstrip to the pinch-weld.
2. Starting at the bottom center of the liftgate opening pinch-weld flange and working towards the top center, being careful not to stretch the liftgate
weatherstrip, align the colored dots to the pinch-weld corners.
3. Use a rubber mallet to ensure full engagement of the liftgate weatherstrip to the pinch-weld flange.
4. Close the liftgate.
