Malibu Classic L4-2.2L (2008)
Parking Brake Pedal: Service and Repair
Park Brake Pedal Assembly Replacement
Removal Procedure
The automatic adjustment park brake pedal assembly and the front park brake cable are serviced as a unit. The front park brake cable has no threads and
is not adjustable.
1. Remove left sound insulator panel to access the park brake pedal assembly. Refer to Instrument Panel Insulator Panel Replacement - Left Side.
2. Remove the left front sill plate. Refer to Front Carpet Retainer Replacement.
3. Remove the 3 park brake pedal assembly nuts.
4. Pull the carpet back in order to expose the front park brake cable.
5. Disconnect the electrical connector from the park brake warning lamp switch.
