Malibu Classic L4-2.2L (2008)
Notice: The bolt retaining the condenser to the radiator end tank is a special length and should be the ONLY bolt used upon reinstallation. The use
of a longer bolt will damage the radiator end tank.
Important: Replace the condenser mounting bolts and nuts.
6. Install the condenser mounting nuts to the radiator.
7. Insert the condenser mounting tabs into the radiator clips.
Notice: Refer to Fastener Notice.
8. Install the condenser mounting bolts.
Tighten the bolts to 6 N.m (53 lb in).
