Malibu Classic L4-2.2L (2008)
5. Install the exhaust camshaft.
6. Install the camshaft caps.
Notice: Refer to Fastener Notice.
7. Tighten the camshaft cap bolts in increments of 3 turns until they are seated.
Tighten the camshaft cap bolts to 10 N.m (89 lb in).
8. Install camshaft sprockets onto the camshafts.
9. Hand tighten NEW camshaft sprocket bolts.
10. Remove the J 43655.
11. Tighten the camshaft sprocket bolts.
Tighten the bolts to 85 N.m (63 lb ft) plus 30 degrees.
12. Install the upper timing chain guide.
Tighten the upper timing chain guide to 10 N.m (89 lb in).
13. Install the camshaft cover.