Malibu Classic L4-2.2L (2008)
Engine Mount: Service and Repair
Powertrain Mount Balance - Lower Mount
Powertrain Mount Balance - Lower Mount
Important: Follow the balance procedure in the order listed in the following steps. Powertrain mounts must be tightened in sequence.
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Loosen, but DO NOT REMOVE the front transmission mount through bolt.
3. Loosen, but DO NOT REMOVE the rear transmission mount through bolt.
4. Rock the powertrain vigorously from front to rear and allow the powertrain to settle.
Notice: Refer to Fastener Notice.
5. Tighten the rear transmission mount through bolt.