Malibu Classic L4-2.2L (2008)
Turn Signal Switch: Service and Repair
Turn Signal Multifunction Switch Replacement
Turn Signal Multifunction Switch Replacement
Removal Procedure
Caution: Refer to SIR Caution.
1. Disable the SIR system. Refer to SIR Disabling and Enabling.
2. Remove the upper and lower trim covers.
3. Disconnect the electrical connectors.
4. Release the multifunction switch clips from the stalk switch mount, remove the multifunction switch.
Installation Procedure
1. Install the multifunction switch to the stalk switch mount.
2. Connect the electrical connectors.
3. Install the upper and lower trim covers.
4. Enable the SIR system. Refer to SIR Disabling and Enabling.
