chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Compressor Hose Assembly Replacement (L61)|Page 2851 > < Heater Inlet Hose Replacement (L61)|Page 2846
Page 1
background image

Hose/Line HVAC: Service and Repair
Compressor Hose Assembly Replacement (L61)

Compressor Hose Assembly Replacement (L61)

Tools Required

J 39400-A Halogen Leak Detector

Removal Procedure

1. Recover the refrigerant. Refer to Refrigerant Recovery and Recharging.

2. Insert 2 small screwdrivers into the 2 slots of the compressor hose and suction line connector and release locking tabs.
3. Remove the compressor hose and suction line connector.
4. Remove the compressor hose from the suction line.
5. Remove and discard the O-rings.

6. Remove the compressor hose bracket bolt.
7. Remove the air cleaner intake duct from the air cleaner assembly.
8. Raise the vehicle. Refer to Vehicle Lifting.

Compressor Hose Assembly Replacement (L61)|Page 2851 > < Heater Inlet Hose Replacement (L61)|Page 2846