Malibu Classic L4-2.2L (2008)
Coolant Temperature Sensor/Switch (For Computer): Service and Repair
Engine Coolant Temperature Sensor Replacement
Removal Procedure
1. Partially drain the cooling system. Refer to Draining and Filling Cooling System (LZ4, LZ9) Draining and Filling Cooling System (GE 47716)
Draining and Filling Cooling System (L61).
2. Disconnect the engine wiring harness electrical connector (1) from the engine coolant temperature (ECT) sensor.
3. Remove the ECT sensor.
Installation Procedure
