Malibu Classic L4-2.2L (2008)
7. This step applies to the Push Down TI style connector ONLY. Release the fitting by pressing on the tab indicate by the arrow.
Caution: Refer to Relieving Fuel Pressure Caution.
8. Pull the connection apart.
9. Wipe off the male pipe end using a clean shop towel.
10. Inspect both ends of the fitting for dirt and burrs.
11. Clean or replace the components as required.
Connect Procedure
Caution: Refer to Fuel Pipe Fitting Caution.
1. Apply a few drops of clean engine oil to the male connection end.
2. Push both sides of the quick-connect fitting together in order to cause the retaining feature to snap into place.
