Malibu Classic L4-2.2L (2008)
7. Remove the caps from the chassis fuel and EVAP pipes.
8. Connect the fuel tank EVAP pipe quick connect fitting (2) to the chassis EVAP pipe (4).
9. Connect the fuel tank fuel feed pipe quick connect fitting (1) to the chassis fuel feed pipe (3).
10. Lower the vehicle.
11. Connect the chassis EVAP pipe quick connect fitting (3) to the EVAP purge solenoid
12. Connect the chassis fuel feed pipe quick connect fitting (1) to the engine fuel feed pipe.
13. Connect the negative battery cable.
14. Tighten the fuel fill cap.
15. Inspect for leaks.
1. Turn ON the ignition, with the engine OFF for 10 seconds.
2. Turn OFF the ignition for 10 seconds.
3. Turn ON the ignition, with the engine OFF.
4. Inspect for fuel leaks.
