Malibu Classic L4-2.2L (2008)
8. Remove the brake, fuel and EVAP pipe retainer (1) from the dash panel stud.
9. Remove the brake pipes (2) from the pipe retainer.
10. Remove the brake, fuel and EVAP pipe retainers (3) from the underbody studs.
11. Remove the brake pipes from the retainers.
12. Remove the fuel feed/EVAP pipe assembly from the vehicle.
13. Place the pipe assembly on a work bench.
14. Open the retainers and remove the fuel feed pipe (2) from the retainers.
15. Replace any retainers as necessary.
Installation Procedure
