chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Positive, Battery Cable|Service and Repair|Page 11698 > < Negative, Battery Cable|Service and Repair|Page 11694
Page 1
background image

Positive: Service and Repair

Battery Positive Cable Replacement (L61)

Removal Procedure

1. Disconnect the negative battery cable.
2. Loosen the positive battery cable bolt (5) and remove the positive battery cable from the battery.
3. Loosen the positive battery cable bolt (6) at the junction block and remove the cable from the junction block.
4. Remove the positive battery cable clip (4) from the battery tray.
5. Remove the tape holding the negative battery cable to the positive battery cable.

6. Raise and support the vehicle. Refer to Vehicle Lifting.
7. Remove the positive battery cable nut (1) from the starter solenoid.
8. Remove the positive battery cable (2) from the starter solenoid.
9. Lower the vehicle.

Positive, Battery Cable|Service and Repair|Page 11698 > < Negative, Battery Cable|Service and Repair|Page 11694