Malibu Classic L4-2.2L (2008)
Battery Tray: Service and Repair
Battery Tray Replacement
Removal Procedure
1. Remove the engine control module (ECM).
2. Remove the battery.
3. Loosen the positive battery cable bolt (6) at the junction block and remove the cable from the junction block.
4. Remove the junction block cover (1).
5. Loosen the junction block bolts (2) and remove the junction block.
6. Remove the body wiring harness electrical connectors (3) from the battery tray.
7. Remove the forward lamp wiring harness electrical connector (4) and the engine wiring harness electrical connector (5) from the battery tray.