Malibu Classic L4-2.2L (2008)
3. Install the engine wiring harness terminal (2) to the starter solenoid.
4. Install the starter solenoid "S" terminal nut (1) to the starter solenoid.
Tighten the nut to 3 N.m (27 lb in).
5. Install the engine wiring harness (3) terminal and the positive battery cable (2) to the starter solenoid.
6. Install the positive battery cable nut (1) to the starter solenoid.
Tighten the nut to 10 N.m (89 lb in).
7. Lower the vehicle.
8. Connect the negative battery cable.
