Malibu Classic L4-2.2L (2008)
Front Steering Knuckle: Service and Repair
Rear Suspension
Knuckle Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Remove the tire and wheel.
3. Remove the rear wheel bearing.
4. Using a suitable jack, raise the knuckle in order to relieve tension from the shock.
5. Remove the lower shock to knuckle bolt.
6. Remove the coil spring.
7. Remove the toe link.
8. Remove the upper control arm to knuckle bolt and nut.
