Malibu Classic L4-2.2L (2008)
8. Install the stabilizer shaft to knuckle bolts.
Tighten the bolts to 50 N.m (37 lb ft).
9. Install the toe links.
10. Install the upper control arm to support assembly bolts and nuts.
Tighten the bolts and nuts to 60 N.m (44 lb ft) plus an additional 60 degrees.
11. Install the lower control arms.
12. Install the rear wheels.
13. Lower the vehicle.
14. Adjust the rear alignment. Refer to Measuring Wheel Alignment.
