Malibu Classic L4-2.2L (2008)
Accumulator: Service and Repair
Accumulator and 2-1 Manual Servo Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Remove the filter.
3. Remove the accumulator bolts (131).
4. Remove the manual 2-1 band servo cover bolts (103).
5. Remove the accumulator assembly.
6. Remove the manual 2-1 band servo (106-116).
7. To disassemble, inspect and service the accumulator and 2-1 manual servo. Refer to 2-1 Manual Band Servo Disassemble.
Installation Procedure
1. If disassembled, assemble the 2-1 band servo. Refer to 2-1 Manual Band Servo Assemble.
