Malibu Classic L4-2.2L (2008)
Shifter A/T: Service and Repair
Transmission Control Lever Knob Replacement
Removal Procedure
1. Remove the center console.
2. Remove the shift control shaft trim by sliding it downward on the shift control assembly shaft.
3. Remove the shift knob setscrew and raise the shift knob off of the shift control assembly shaft.
4. Disconnect the shift knob electrical connector.
5. Remove the shift knob wiring harness from the retaining tabs on the shift control assembly.
6. Remove the shift knob and shift control shaft trim as an assembly and then remove the knob wiring from the shift control shaft trim.
Installation Procedure