chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

4T45-E - Automatic Transaxle|Page 10681 > < 4T45-E - Automatic Transaxle|Page 10679
Page 5
background image

5. Install the transmission mount to bracket through bolt and nut.

Tighten the bolt and nut to 90 N.m (66 lb ft).

6. Remove the jack stand. 
7. Install the left tire and wheel.
8. Lower the vehicle.

Transmission Mount Replacement - Left Side (W/L61)

Transmission Mount Replacement - Left Side (W/L61)

Removal Procedure

1. Remove the battery and tray.

2. Using a floor jack and a block of wood, support the powertrain.

4T45-E - Automatic Transaxle|Page 10681 > < 4T45-E - Automatic Transaxle|Page 10679