Malibu Classic L4-2.2L (2008)
2. Install the left transmission mount to body bolts.
Tighten the bolts to 50 N.m (37 lb ft).
3. Remove the floor jack supporting the engine.
4. Install the battery and tray.
Transmission Mount Replacement - Left Side (W/ LZ4)
Transmission Mount Replacement - Left Side (W/ LZ4)
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Remove the left front tire and wheel.
3. Remove the left splash shield.
4. Using a suitable floor jack and block of wood, support the powertrain.
