Malibu Classic L4-2.2L (2008)
Rear Door Window Motor: Service and Repair
Rear Side Door Window Regulator Motor Replacement
Removal Procedure
1. Open the rear door.
2. Remove the rear door trim panel.
3. Remove the water deflector.
4. Disconnect the electrical connector from the rear door window regulator motor.
5. Remove the rear door window regulator to door screws (1).
6. Position the rear door window regulator through the access opening to allow removal of the rear door window regulator (2).
7. Remove the rear door window regulator motor to regulator screws (1).
8. Remove the rear door window regulator motor assembly.
Installation Procedure