Malibu Classic L4-2.2L (2008)
Wiper Motor: Service and Repair
Air Inlet Grille Panel Replacement
Air Inlet Grille Panel Replacement
Removal Procedure
1. Remove the wiper arms.
2. Disconnect the washer hose from the washer solvent container hose.
3. Disconnect the washer hose retainer from the body.
4. Remove the push-pin fasteners from the air inlet grille panel.
5. Remove the air inlet grille panel from the vehicle.
6. If you are replacing the grille panel, perform the following procedures:
* Remove the plenum-to-hood seal.
* Remove the windshield washer hose.
Installation Procedure
