Metro L3-061 1.0L VIN 6 TBI (1998)
11. Remove the positive crankcase ventilation (PCV) hose from the cylinder head cover.
12. Remove the accelerator cable from the TBI unit.
13. Remove the five nuts and two bolts from the intake manifold.
14. Remove the intake manifold (4) with the TBI unit (1) and wire clamps from the cylinder head still attached.
15. Remove the intake manifold gasket (5) from the cylinder head.
INSTALLATION PROCEDURE
1. Install the new intake manifold gasket (5) to the cylinder head.
2. Install the intake manifold with the TBI unit (1) and wire clamps to the cylinder head still attached.
3. Secure the intake manifold with the five nuts and two bolts.
^
Tighten the intake manifold fasteners to 23 Nm (17 ft. lbs.).
