Metro L3-061 1.0L VIN 6 TBI (1998)
9. Turn the crankshaft a half rotation clockwise to confirm that the two sets of marks are aligned.
10. Confine that the camshaft marks (1 and 4) are aligned properly.
11. Confirm that the crankshaft marks (2 and 3) are aligned properly.
IMPORTANT: Ensure that the seal is between the coolant pump and the oil pump case, before installing the timing belt cover.
12. Install the timing belt cover (1). Secure the timing cover with the eight bolts and the one nut.
^
Tighten the timing belt cover nut and bolts to 11 Nm (97 ft. lbs.).
13. Install the coolant pump pulley. Secure the coolant pump pulley with the four bolts.
^
Tighten the coolant pump pulley bolts to 24 Nm (18 ft. lbs.).
14. Install the crankshaft pulley.
