Metro L3-061 1.0L VIN 6 TBI (1998)
9. Release the 2 lower lock tabs from the A/C compressor control module (2). Slide the A/C compressor control module upward in order to remove
the A/C compressor control module from the evaporator case.
10. Disengage the retaining clips (1) in order to separate the two halves of the evaporator case.
11. Separate the two halves of the evaporator case (1,3).
12. Remove the evaporator core (2) from the evaporator case.
Installation Procedure
1. Install the evaporator core (2) to the evaporator case.
2. Secure the upper half (3) and the lower half (1) with the retaining clips.