Metro L3-061 1.0L VIN 6 TBI (1998)
Evaporator Temperature Sensor / Switch: Description and Operation
The A/C refrigerant temperature sensor is a thermistor that translates temperature into an electrical resistance. Thermistors are connected into electrical
circuits in order to determine the temperatures in critical areas. Thermistors are used in engine controls systems such as engine coolant temperature (ECT
) and intake air temperature (IAT) sensors. Thermistors are used in A/C systems in order to determine temperatures at the evaporator core. If the
evaporator core temperatures drop to about 0°C (32°F), frost and ice will start to form on the evaporator fins. Ice formation on the evaporator fins will
seriously impede airflow through the evaporator and will reduce the ability of the system to cool the vehicle interior.
In order to prevent ice formation on the evaporator fins the system incorporates a thermistor that is electrically connected to the A/C compressor control
module. When the evaporator temperatures drop to 0°C (32°F) the A/C compressor control module reads the corresponding thermistor resistance as a
system cutout signal. When the signal is received, the A/C compressor control module shuts down the compressor until the evaporator core temperatures
increase to 3°C (37°F).
