Metro L3-061 1.0L VIN 6 TBI (1998)
Installation Procedure
1. Coat new O-rings with mine rat base 525 viscosity refrigerant oil.
2. Install the O-rings to the receiver/dryer outlet pipe (6).
3. Position the receiver/dryer outlet pipe (6) behind the radiator core support brace.
4. Secure the receiver/dryer outlet pipe in the condenser fan retaining clip.
5. Connect the receiver/dryer outlet pipe to the evaporator inlet pipe.
6. Install the receiver/dryer outlet pipe to the receiver/dryer. Secure with the bolt.
7. Evacuate and recharge the air conditioning (A/C) system.
8. Operate the A/C system and inspect for refrigerant leaks.