Metro L3-061 1.0L VIN 6 TBI (1998)
Tachometer: Service and Repair
REMOVAL PROCEDURE
CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
1. Disconnect the negative battery cable.
2. Remove the instrument cluster from the instrument panel.
3. Push on the tabs in order to remove the cluster lens (7) and the bezel assembly (6) from the cluster housing (3).
4. Remove the tachometer from the cluster housing by removing 3 screws (1).
INSTALLATION PROCEDURE
1. Install the tachometer to the cluster housing. Secure the tachometer with the 3 screws (1).