Metro L3-061 1.0L VIN 6 TBI (1998)
Trunk Light Bulb: Service and Repair
REMOVAL PROCEDURE
CAUTION: Refer to Battery Disconnect Caution In Cautions and Notices.
1. Disconnect the negative battery cable.
2. Open the rear compartment lid.
3. Using a flat-bladed tool, gently remove the plastic lamp cover (3).
4. Remove the bulb (2) From the socket (1).
INSTALLATION PROCEDURE
1. Install the bulb (2) to the socket (1).
2. Install the plastic lamp cover (3).
3. Close the rear compartment lid.
4. Connect the negative battery cable.