Metro L3-061 1.0L VIN 6 TBI (1998)
Heater Hose: Service and Repair
Removal Procedure
1. Drain the engine cooling system.
2. Release the heater core inlet hose clamps at the bulkhead and:
^
At the intake manifold - 1.0L
^
At the thermostat housing - 1.3L
3. Remove the heater core inlet hose.
4. Release the heater core outlet hose clamps at the bulkhead and at the radiator inlet hose:
^
Running along the top of the transaxle - 1.0L
^
Above the starter - 1.3L
5. Remove the heater core outlet hose.
Installation Procedure
1. Connect the heater core inlet hose to the bulkhead and:
^
To the intake manifold - 1.0L
^
To the thermostat housing - 1.3L
2. Secure the hose with clamps.
3. Connect the heater core outlet hose to the bulkhead and to the radiator inlet hose:
^
Running along the top of the transaxle - 1.0L
^
Above the starter - 1.3L
4. Secure the hose with clamps.
5. Refill the engine cooling system.