Metro L3-061 1.0L VIN 6 TBI (1998)
6. Blow air into the EVAP canister purge valve vacuum hose (2) that was disconnected from the EVAP canister. Air should not pass through the
EVAP canister purge valve (1) and exit from the intake manifold hose (3).
7. Connect 12 volts DC to the EVAP canister purge valve electrical terminals.
8. Blow air into the EVAP canister purge valve vacuum hose that was disconnected from the EVAP canister. Air should pass through the EVAP
canister purge valve and exit from the intake manifold hose.
9. Replace the EVAP canister purge valve if the EVAP canister purge valve failed this inspection. Refer to EVAP Canister Purge Valve
Replacement.
10. Connect the EVAP canister purge valve vacuum hoses.
11. Connect the EVAP canister purge valve electrical connector